SLITTING OPERATIONS 2

 

In order to excel in our commitment to our customer quality requirement, the addition of the Pro Eco unit enables our production planning employees to dedicate all automotive exposed and surface critical material to the Alcos and all non-automotive to the Pro Eco. This strategy has added efficiencies largely to our plant scheduling, as well as gains in our product quality, ensuring our just-in-time customer service, along with our 100% on-time delivery requirements

 

 

slittingop2_640

 

1/4" PRO ECO 72" SLITTER WITH SINGLE RECOILER

 

HIGH-SPEED, 3 HEAD INJECTION SYSTEM WITH SHIMLESS TOOLING &
GAMMA RAY GAUGE MONITOR
Material
Incoming Material Quality
Incoming Strip Crown

HRP&O, CRS, Galvanized, Aluminized
To ASTM Standards
Max. 2%

Shear Stress
Yield Strength

Strip Thickness
Strip Width at Entry
Strip Width at Exit


Coil Weight at Entry
Coil Weight at Exit
Coil O.D. at Entry
Coil O.D. at Exit
Coil I.D. at Entry
Coil I.D. at Exit


Max. 50,000 PSI
Max. 50,000 PSI

Max. 0.250 Ins.
Max. 76 Ins.
Max. 72 Ins.


Max. 70,000 Lbs.
Max. 70,000 Lbs.
Max. 78 Ins.
Max. 78 Ins.
20 - 24 Ins.
20 - 24 Ins.

Min. 30,000 PSI

Min. 0.012 Ins.
Min. 12 Ins.
Min. 12 Ins.
(Determined by Knife Setup)



Min. 40 Ins.
Min. 40 Ins.



Line Speed



Electrical Supply
Electrical Control Supply

Air Supply
Hydraulic Design Pressure

Hydraulic Working Pressure

Mode of Operation
Set-Up Position
Passline Height

Line Direction
Pay-Off Direction
Rewind Direction

Constant High Speed, 1000 FPM
Constant Low Speed, 500 FPM
Recoiler Gear-In, Refer to Recoiler Specification

575/3/60
110/1/60

80 PSI
1600 PSI (1750 at Pump)

1500 PSI

Tight Line, Slitter Assist & Full Loop
Edge Reference, Edge & Centerline Running
58 Ins. (Approx.)

Left to Right
Over Unwind
Over Rewind